0102030405
Baoji China ODM supply Different type and size of Titanium/nickel Equal/reducing Tee for TYPE A
Product introduction
Tee is pipe fitting and pipe connecting piece. Also called pipe fittings tee or tee fittings, tee joints, used in the main pipe to branch pipe.
A tee has three openings, namely one inlet and two outlet; Or two inlet, one outlet of a chemical pipe fittings, T shape and Y shape, with equal diameter pipe mouth, also have reducing diameter pipe mouth, used for three same or different pipe convergence. The main function of the tee is to change the direction of the fluid.
Tee is a pipe fitting used at the branch of a pipe. For the use of seamless pipe manufacturing tee, the process usually used at present has two kinds of hydraulic expansion and hot pressing. The hydraulic expansion of tee is a forming process in which the branch pipe is expanded by the axial compensation of the metal material. The process is to use a special hydraulic press to inject liquid into the tube billet with the same diameter as the tee, and then press the tube billet through the two horizontal side cylinders of the hydraulic press. The volume of the tube billet becomes smaller after being squeezed, and the liquid in the tube billet increases with the volume of the tube billet. The metal material flows along the inner cavity of the die under the double action of the liquid pressure in the side cylinder and the tube blank and expands the branch pipe.
Features
* There are three female openings in a ‘T’ formed pipe tee.
* There are straight pipe tees which have the same size openings.
* Equal tee make them open of various size and two openings of the same size.
* There are sterile equal tees which are utilised as a part of waste lines.
* These sort of equal tees have a bent branch which is intended for a wipe outfitting. They are utilised to avoid hindrance of waste.
* An equal tee has dragged to attach the fitting to a divider or stud.
* An equal tee utilises pressure fittings on two or more finishes.
* An equal tee has a strong opening. This opening is utilised as a part of conjunction with a strong fitting for a get out an opening on a drain pipe.
* Excellent corrosion resistance in many media
* Low density, high strength and equipment weight
Manufacturing process
Titanium tees are cold-drawn equal diameter tees, which are also the so-called seamless equal diameter tees. The production process of this tee is a cold drawing process, the process of cold drawing is to squeeze the pipe on both sides and the inside of the pipe will be pressurized to extrude the branch pipe between them, each material has its specific tensile strength and resistance to yield, so the selection of equal diameter tee raw materials must understand its characteristics. With the rapid development of external pipeline construction, pipeline pressure test has become an essential link, before and after the pressure test, each section of the pipeline must be swept through the ball, the number is generally 45 times. The main function of the tee is to change the direction of the fluid. Divided according to pipe diameter size: the nozzle end of the equal diameter tee is the same size; The main pipe size of the reducing tee is the same, and the nozzle size of the branch pipe is smaller than that of the main pipe. Divided by production method: top, pressing, forging, casting, etc.
Product Paramenters
NPS |
O.D. |
Center to End |
Center to End |
1/2 |
21.3 |
25 |
25 |
3/4 |
26.7 |
29 |
29 |
1 |
33.4 |
38 |
38 |
1.1/4 |
42.2 |
48 |
48 |
1.1/2 |
48.3 |
57 |
57 |
2 |
60.3 |
64 |
64 |
2.1/2 |
73 |
76 |
76 |
3 |
88.9 |
86 |
86 |
3.1/2 |
101.6 |
95 |
95 |
NPS |
O.D. |
Center to End |
Center to End |
NPS |
O.D. |
Center to End |
Center to End |
4 |
114.3 |
105 |
105 |
5 |
141.3 |
124 |
124 |
6 |
168.3 |
143 |
143 |
8 |
219.1 |
178 |
178 |
10 |
273 |
216 |
216 |
12 |
323.8 |
254 |
254 |
14 |
355.6 |
279 |
279 |
16 |
406.4 |
305 |
305 |
18 |
457 |
343 |
343 |
20 |
508 |
381 |
381 |
22 |
559 |
419 |
419 |
24 |
610 |
432 |
432 |
NPS |
O.D. |
Center to End |
Center to End |
NPS |
O.D. |
Center to End |
Center to End |
26 |
660 |
495 |
495 |
28 |
711 |
521 |
521 |
30 |
762 |
559 |
559 |
32 |
813 |
597 |
597 |
34 |
864 |
635 |
635 |
36 |
914 |
673 |
673 |
38 |
965 |
711 |
711 |
40 |
1016 |
749 |
749 |
42 |
1067 |
762 |
711 |
44 |
1118 |
813 |
762 |
46 |
1168 |
851 |
800 |
48 |
1219 |
889 |
838 |
NPS |
O.D. |
Center to End |
Center to End |
Dimensions are in millimeters unless otherwise indicated. Wall thickness (t) must be specified by customer.
Outlet dimension (M) for NPS 26 and larger is recommended but not required.
Product Applications
Package
Standard export wooden box packing