Products

Standrad：ASTM B127-1998; ASTM B162-1999

Material：Nickel 201 - UNS N02201 - Ni201 - Pure Nickel; N4,N5,N6,N7, N02200, N02201, NCu28-2.5-1.5, NCu40-2-1, NCu30, Monel400, NO6600

Several preparation methods of metal nickel are briefly described:

☆Electrolysis method ☆ Carbonylation method ☆ Hydrogen reduction method

① Electrolysis. The enriched sulfide ore is calcined into oxide, reduced to crude nickel by carbon, and then pure metal nickel is obtained by electrolysis.

② Carbonylation method. Nickel sulfide ore and carbon monoxide reaction to produce tetracarbonyl nickel, heated decomposition, and high purity metal nickel.

③ Hydrogen reduction method. Nickel metal can be obtained by reducing nickel oxide with hydrogen.

Standrad: GOST 33259-2015
Type: PL/WN/SO/IF/SW/TH/BL/LWN; Flat welded flange, Flat welded flange with neck, hubbed flange, integral type flange, welding neck flange, socket welding flange, threaded flange, PJSE PJ/RJ flange/Butt welded ring loose sleeve flange, STFL STFL PJ flange/RJ/Flat welded ring loose sleeve flange
Material：Titanium, Nickel, Superalloy flange

Standard: SAME B16.9
Type: Equal/reducing Tee;
Material：Titanium, Nickel, Superalloy flange

Standrad: ASTM B338，ASTM B861
Size: Dia 8.0mm ~114mm, supplied is semaless tube;
Dia >114mm, is titanium welded tubes; length is 18000mm (Max).
Material: Grade1,2,5,7,9,11,12,16

Standrad: ASTM 453 ASTM B1677
Material: N06075 N07718 N07090 N04400 N05500 N10665 N10675 N06455 N06022 N10276 N06200 N06030 N06600 N06601 N06617 N06625 N07718 N08800 N08810 N08811 N08825 S66286

Standard：ASTM B863
Size: 0.5mm ~6mm;
Type: Straight, coil, spool;  
Material: Grade1,2,5,7,9,11,12,16 etc.

Size: Dia 0.03mm ~10.0mm;
Type: Straight, coil, spool;
Material: Nickel 2.4068 Coils, Nickel 201 Coil, ASTM B162 Nickel 201 Coils, Nickel 201 Shim Coils, UNS N02201 Coils, Nickel 201 Coils, Nickel 201 Coils Stockist, Alloy 201 Coils, Nickel Alloy 201 Coils,Nickel 201 Coils

Standrad: ASTM 1295  ASTM F136
Size: Dia 7.0mm ~230mm;
Dia >7-230mm, is titanium bar; length is 6000mm (Max).
Material: Grade1,2,5,7,12,23,28

Standrad: ASTM B574
Material: N06075 N07718 N07090 N04400 N05500 N10665 N10675 N06455 N06022 N10276 N06200 N06030 N06600 N06601 N06617 N06625 N07718 N08800 N08810 N08811 N08825 S66286

Standrad: ASTM B160
Size: Dia 3-254mm; length is 300-6000mm .
Material: N02200、N02201、N04400

Standrad：ASTM B265（ASME SB265）
Sheet Dimensions: Thickness: 0.5 – 300 mm
Length: 1000 – 6000 mm
Width: 400 – 1500 mm.
Material：Gr 1, 2, 3, 4, 5(6Al-4V), 7(Ti-0.15Pd), 9(3Al-2.5V), 12, 23(6AL-4V ELI), 15V-3Al-3Sn-3Cr

Standrad：B409-01
Sheet Dimensions: Thickness: 0.3 – 50 mm
Length: 500 – 4500 mm
Width: 300 – 3000 mm.
Material：N06075 N07718 N07090 N04400 N05500 N10665 N10675 N06455 N06022 N10276 N06200 N06030 N06600 N06601 N06617 N06625 N07718 N08800 N08810 N08811 N08825 S66286